• #LaZonaTec
  • contamos con los mejores precios de Guatemala
  • #cotiza_y_compara
  • #LaZonaTec
  • contamos con los mejores precios de Guatemala
  • #cotiza_y_compara

KANGERTECH CUPTI STARTER KIT 75W
KANGERTECH CUPTI STARTER KIT 75W
KANGERTECH CUPTI STARTER KIT 75W
KANGERTECH CUPTI STARTER KIT 75W
KANGERTECH CUPTI STARTER KIT 75W

KANGERTECH CUPTI STARTER KIT 75W

Precio habitual Q650.00 Q425.00

Pregunta por este producto

MÉTODOS DE PAGO

  

  

El kit Kanger CUPTI TC de 75 vatios es un dispositivo AIO definitivo que admite MTL y DL vaping. Cuenta con tubo de vidrio reemplazable y una celda 18650, control de temperatura, sistema sin fugas y CLRBA opcional. CUPTI es el dispositivo perfecto para el uso diario.

Caracteristicas:

  • Capacidad: 5ml
  • Medidas: 50mm (L) x 22.5mm (W) x 82mm (H)
  • Material: Zinc alloy and Al alloy
  • Drip tip: POM Black (can exchange)
  • Pantalla: OLED
  • Max Salida: 75W
  • Temp control: 100℃ - 300℃/200F - 600F
  • Resistencia: CLOCC SS316L 0.5ohm (DL); CLOCC NiCr 1.5ohm (MTL); Optional CLRBA
  • Carga: 1A current; Micro USB, input voltage DC 5V
  • Bateria: 1 x 3.7V, 18650 discharge over 30A (NO INCLUIDA)

El paquete incluye:

  • 1 x CUPTI
  • 1 x CLOCC SUS316L 0.5ohm
  • 1 x CLOCC NiCr 1.5ohm
  • 1 x Spare drip tip
  • 1 x USB cable
  • 1 x Manual

  • 0ML
  • Leak-free
  • 75W output
  • Replaceable 18650
  • Temperature control
  • All in one device
  • For MTL and DL
  • CLRBA (optional)
  • Replaceable Pyrex glass
  • Durable surface furnishing

CUPTI usage:

 5 speedy clicks to switch on/ off the battery;

  1. After switched on, LCD displays "KANGER TECH" at standby mode;
  2. Press fire button 3 times, choose your resistance wire Ni200, Ti, Nicr or pure wattage output;
  3. For pure Ni200, Ti, SS or Nicr resistance wire, you can set your desired coil temperature to fit your taste.
  4. For power output mode, set your desired working wattage that best fits you.
  5. Press + and - together to choose LCD display orientation.
  6. Press +, - and fire button all together, this can lock the up and down button once you have best setting by press the entire buttons together.
  7. In case you change the coil or vape in other environment of pressing, you may need to calibrate the CUPTI atomizer as well, yes (+) or no (-) for best performance.
  8. If no display of calibration:
    1. Screw down the CLOCC.
    2. press the fire button till LCD display " check atomizer"
    3. Screw back the SUBDRIP and press fire button again. 

Protection: Short circuit protection/ Atomizer open circuit/ Cell reverse protection/ PCB over temperature protection/ 10 seconds protection/ Cell capacity protection